L'analizzatore di cavi Fluke DTX-1500 ha ottenuto la certificazione Cat 6 in 9 secondi
DTX-1500 CableAnalyzer offre una soluzione completa che semplifica tutti gli aspetti della certificazione dei test, tra cui la configurazione, i test, la risoluzione dei problemi e la segnalazione dei risultati ai clienti. Il DTX-1500 è in grado di completare test di certificazione Classe E/Cat 6 in soli 9 secondi e test di certificazione Classe EA/Cat 6A in soli 22 secondi, in piena conformità con gli standard del settore con una precisione estremamente elevata. Questa incredibile velocità di test significa che puoi testare centinaia di link in otto ore.
Risoluzione rapida dei problemi
Quando un collegamento fallisce, il tester DTX-1500 fornisce un modo rapido e facile da capire per individuare il punto di guasto (la distanza dal tester) e le possibili cause del guasto. Questi metodi non solo individuano i guasti, ma suggeriscono anche misure correttive in modo che i tester possano risolvere rapidamente il problema senza consultare il project manager. I tecnici non hanno bisogno di prendere il tempo per eseguire test ripetuti e ri-test per determinare se il problema è stato risolto. Invece, sanno esattamente dove sta il problema e come risolvere i collegamenti rotti. L'analizzatore di cavi Fluke DTX-1500 consente di risparmiare fino a due ore di lavoro al giorno durante il processo di certificazione, anche se solo il due per cento dei cavi testati in un turno non supera il test automatico.
Non solo test veloci
L'analizzatore di cavi Fluke DTX-1500 non solo testa velocità. È semplice da usare e quindi riduce i tempi di formazione. La durata della batteria più lunga dell'analizzatore di cavi Fluke DTX-1500 significa che più test possono essere effettuati con una sola carica. Il display a colori brillante dell'analizzatore di cavi Fluke DTX-1500, la memoria sufficiente e l'interlocutore integrato migliorano non solo l'efficienza generale, ma anche l'esperienza dell'utente. Questi fattori ti aiutano a risparmiare tempo e ** ogni giorno.
| Model | Description |
| DTX-1500 | DTX-1500 CableAnalyzer includes:
|
| DTX-PLA002S | Cat 6A/Class EA Permanent Link Adapters, set of 2 |
| DTX-PLA001 | Permanent Link Adapter for use with DSP-PMxx Personality Modules |
| DSP-PMxx | Personality Modules for IDC and Legacy Cabling Systems for use with DTX-PLA001 |
| DTX-CHA002S | Cat 6A/Class EA Channel Adapters, set of 2 |
| DTX-COAX | Coax Cable Test Adapters, set of 2 |
| DTX-CHA021S | M12 4-Position Channel Adapters, set of 2 |
| DTX-LION | Lithium-Ion Battery Pack |
| LinkWare | LinkWare Cable Test Management Software (download at www.flukenetworks.com/linkware) |
| Test Standards | |
| TIA | Category 3, 5, 5e, 6, 6A per TIA 568-C.2 or TIA-1005 |
| ISO/IEC | Class C and D, E, EA certification per ISO/IEC 11801:2002 and amendments |
| IEEE 802.3 | 10BASE-T, 100BASE-TX, 1000BASE-T, 10GBASE-T |
| General Specifications | |
| Speed of Autotest | Full 2-way Autotest of Category 5e or 6/Class D or E: 9 seconds; Full 2-way Autotest of Category 6A/Class EA: 22 seconds |
| Supported test parameters (test standard determines parameters and frequency range reported) | Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (Attenuation), Return Loss (RL), Near End Crosstalk (NEXT), Attenuation-to-Crosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (PS ELFEXT), Power Sum NEXT, Power Sum ACR-N |
| Maximum frequency | 500 MHz |
| Test Result Storage | 250 with graphical data; >1500 without graphical data |
| Display | 3.7 in (9.4 cm) diagonal, 240x320 pixel, passive color LCD with backlight |
| Dimensions | Main and Smart Remote: 8.5 in x 4.4 in x 2.4 in (21.6 cm x 11.2 cm x 6 cm), nominal |
| Weight | 2.4 lb (1.1 kg), nominal (without adapter or module) |
| Battery | Lithium-ion, 7.4 V, 4000 mAh |
| Battery Life | 12 hours, typical |
| Battery Charge Time | 4 hours (below 40? C, with tester off) |
| Environmental Specifications | |
| Operating temperature | 32° F to 113° F (0° C to 45° C) |
| Storage temperature | -4° F to +140° F (-20° C to +60° C) |
| Operating relative humidity (% RH without condensation) | 32° F to 95° F (0° C to 35° C): 0 % to 90 % 95° F to 113° F (35° C to 45° C): 0 % to 70 % |
| Vibration | Random, 2 g, 5 Hz -500 Hz |
| Shock | 1 m drop test with and without module and adapter attached |
| Safety | IEC 61010-1: Measurement Category None, Pollution Degree 2 |
| Altitude | Operating: 4000 m (3048 m with AC Adapter); Storage: 12000 m |
| EMC | EN 61326-1: Portable |
